Stakesys BR-24 Electric Bead Roller Full Setup

In stock
SKU
BR-24E
£1,495.00 £1,245.83
Calculate UK Shipping below

Photo currently shows the older BR-23 model. You will receive the new BR-24 model as seen under the manual bead former section here: https://stakesys.co.uk/bead-formers-jennys/manual-machines/stakesy-s-br-24-bead-roller

(Included Bead Former Head Unit, Motor Kit & Stand - tooling extra)

Our own, 100% UK made, Stakesys Heavy Duty 230v Electric Bead Former with a 24” throat depth allowing beads, steps, tipped and wired edges to be formed into steel up to 1.2mm and aluminium up to 1.6mm.

The 1” diameter shafts run in 4 bronze bushings and the upper shaft has fore and aft adjustment for centering rolls and adjusting step die angles. The box section is 5mm wall with a solid billet steel centre block to prevent flex, and the pressure adjustment handle is a bakelite type plastic with internal bearings. We have tried to keep the upper shaft adjustment backlash down to a minimum to make it a machine to use.

The Stakesys BR-24 Electric Bead Former comes complete with an adjustable backstop rail to attach the optional backstops (available separately in the next few months). 

The 230v motor kit comes separately for shipping reasons, and is designed to attached in lss than 30 minutes. No wiring is necessary. Simply bolt on and adjust the x,y and z alignment and the cush drives and you are ready to go.

Comes without roll sets which are available in the following shapes under a separate listing:

-Round Bead

-Square Bead

-Rounded Square Bead

-Step Roll (Joggle)

-Tank Roll with backstop

-3 Stage / 6-Roll Wired Bead Kit (coming soon)

-3 Stage / 6-Roll Safety Edge Kit (Pittsburgh lip)

-Tipping Dies with Backstop & Smooth Lower Rolls

 

230v Motor Kit

230v Motor upgrade kit designed and built in-house at Stakesy’s as a 15 minute bolt on upgrade to convert your manual BR-23 bead former to an electric machine. No wiring necessary. The kit replaces the handle and fits directly on to the lower drive shaft via a cush drive and is adjustable in 3 directions for perfect alignment. 

Power comes from an 230v / 250w (1/2hp) induction motor which is almost silent in operation. This motor is 5 times more powerful than the noisy Dayton Brush motors found on other machines. Power is converted from 230vAC to 24DC at the aluminium twin pedal switch, where the operator can choose from both forward and reverse directions independently, whilst keeping both hands on the workpiece. Speed is infinitely variable from 0 rpm upwards and controlled via the dial on the motor housing. All cabling is armour plates for industrial environments and the machine is fitted with an No-Volt-Release emergency switch. 

We found this twin pedal design far more controllable than the single pedal speed controller systems commonly found on competitors' machines where its can be difficult to control speed on slower tricky corner shaping whilst trying to balance on 1 foot and control speed with the other. With our 2 pedal system a slow speed can be selected for better control during delicate operations such as tight radii corners, and then sped up on the dial for long straight shaping lines. The motor kit is powerful enough to bead 1.2mm mild steel and 1.6mm alu. Number of passes depends on both material and tooling on any bead former. 

 

Product Code: 

BR-24ECK

 

Input:

230v / 50Hz fitted with UK 3pin plug

Output:

 250W / 1.8A

 

Pedal Box:

24vDC

Weight:

20kg

 

 

Write Your Own Review
You're reviewing:Stakesys BR-24 Electric Bead Roller Full Setup
Your Rating
More Information
Manufacturer Stakesys

Delivery & Returns

Items under 30kg will be shipped by either 24hr courier or 1st class Royal Mail depending on item and weight and size.
All orders will be packaged and despatched same or next day. Orders made later in the day will most likely be sent out the following day.
We use a Next Day Delivery service however this service is subject to stock, courier availability and courier area. A signature is required for courier deliveries so please arrange for someone to be in at delivery address.   

Delivery prices are calculated by total order weight & size and are as follows:

Weight

UK Mainland

Highlands & Islands

0-2kg

£4.50

£4.50

2.01-30kg

£4.50

£21.50

31-45kg

£19.50

£31.50

45kg +

£55

Various

Buying from outside GB Mainland.

We are happy to deliver worldwide upon request. Because of the many variables involved our website cannot calculate global shipping or deduct UK Tax, please call on +44 1509 812171 or email info@stakesys.co.uk and we will work out the best price for you.

Heavy Goods Items/ Pallets

If you are ordering to Mainland UK or Highlands and Islands, once added to your basket, our shipping calculator will work out a shipping price depending on your delivery post code. Delivery can take up to 4 working days from point of order but is often sooner depending on location. We will call to let you know estimated delivery date, you may be required to help the driver move the product from the roadside to your desired location, please ensure somebody is in to receive the goods as there is a redelivery charge of £30 should you miss it.

We also ship heavy goods and pallets worldwide, however not through the website, please call on +44 1509 812171 or email info@stakesys.co.uk.


Returns Policy 
Stakesy’s Guarantee: 14 Day Money Back Guarantee 

1/ Items returned under the 7 working day cancellation period 
If for any reason you are unhappy with your purchase, you can return it to us in its original condition within 7 days of the date you received the item, unopened (with any seals and shrink-wrap intact) and we will refund the cost of the item and the cost of sending the item to you as follows: 
-where you are returning an item that was part of a larger order, we'll refund the per-item charge for delivery that you incurred -where you are returning an entire order, we'll refund all delivery charges that you incurred -we will refund only standard shipping charges for items delivered mainland UK (excluding Highlands & islands and orders over 25 kilos in weight)

2/ Items returned under 14-day returns guarantee 
Where you are withdrawing from your purchase between 7 and 14 days after delivery, and there has been no error on our part, we will refund only the cost of the item minus 10% handling charge. We will not refund the cost of delivery or other services provided to you in connection with your purchase.

3/ Any goods items over 60 kg that have incurred special freight charges are excluded and the buyer will be responsible for both arranging and the costs of the return delivery.

Refunds will be paid within thirty days of cancellation. 

Please post goods to be returned or exchanged to:

Stakesy’s Metalwork Machinery, Unit 12 Hayhill Industrial Estate, Loughborough, LE12 8LD.

It is crucial that you pack the goods to be returned the same way as we sent out. Please consider that a returned item that is damaged in return transit may well be un-refundable if we cannot re-sell. Please include a note of your requirements and original invoice number.