Customer Projects

Customer:

Wayne Allman (Intergalactic Custom Shop)

Tool Used:

RB38/3 Roll Bender & custom made 2”x1” rectangular roll set

Wayne Allman from The Intergalactic Custom Shop sent in this photo of the catering van chassis in the style of an airstream trailer they are making. It was created using our RB38/3 Roll Bender along with a custom made 2"x1" rectangular roll set.

Customer:

Dave Pearce (TigCraft)

Tool Used:

Slugger Hole Saw tube Notcher & JD2 Model 32 Tube Bender

Dave Pearce from Tigcraft used an STA155 slugger hole saw notcher and a JD Squared Model 32 tube bender to fabricate this circuit racing frame. 

Customer:

Andrew Kenworthy

Tool Used:

JMR1000 Tube Bender & Bend Tech Pro Software

Andrew Kenworthy used a JMR1000 ratchet tube bender and Bend Tech Pro tube bending software to draw up and bend this straightliner. 

Customer:

Gareth Lewis (Cargo Cycles)

Tool Used:

RB38/2 Dual-Drive Tube Roller

Our Customer Gareth's project made using the RB38/2 Dual-Drive Tube Roller. 

Customer:

Douglas Eames (Guardsman Engineering)

Tool Used:

JMR Raceline Tube Bender

'I built this using your JMR heavy duty with the swag conversion to hydraulic...I love the JMR with hydraulic conversion. I've made several frames now on this machine and its perfect every time' 

Customer:

The Tube Chassis 'Caddy' Project

Tool Used:

Pipemaster Contour Gauge

'Got my new PipeMaster from Stakesy's Metalwork Machinery out to do these awkward multi-angled joints. Took a long time still but the result was quite good. Chamfered and welded in.' 

Customer:

Jason Flather

Tool Used:

JD2 Model 32 Tube Bender

'Created this motorbike paddock stand with my new JD mod32. Very impressed with the quality and even more impressed with Matt of Stakesy's with his help and advice even out of hours on his mobile phone.' 

Customer:

Dave Pearce (TigCraft)

Tool Used:

Slugger Hole Saw Tube Notcher, Coba Tech Holesaws & Pipemaster Contour Gauge

'What can be achieved using Stakesys Metal working machinery. Winner HEL Motostar Moto3 race Brands Hatch'

Customer:

Andrew Jones

Tool Used:

JD Squared Notchmaster Tube Notcher and Coba Tech Holesaws

'I’ve just ordered some more Coba hole saws for mitering (I’m sticking with UK terminology) cycle tubing. I can cut thin wall chromoly cycle tubes without any distortion taking place when I use them with the JD2 mitering tool which I also bought from you. Here is a photo of my folding bike project'

Customer:

Bob Worral

Tool Used:

SWAG Hulk Roll Bender

'Here are the roof bars that have been rolled on the swag roll bender I purchased from you. They are 50mm square X 2.5mm wall thickness. I found the machine very easy to use and the advice from you invaluable.'

Customer:

Iain Wood

Tool Used:

JD Squared Model 32 Tube Bender & Slugger Tube Notcher

Our Customer Iain's project made using the JD Squared Model 32 Tube Bender, Slugger Tube Notcher, Coba Tech Holesaws and the Pipemaster Contour Gauge

Customer:

Lee Talbot

Tool Used:

JD Squared Model 32 Tube Bender and JD Squared Notchmaster Tube Notcher

'Some pictures of my Renault Trafic race van, the model 32 really does bend nice, thanks'

Customer:

Kev Walker "The best bike builder in Bishop Norton"

Tool Used:

JD Squared Model 32 Tube Bender, JD Squared Notchmaster Tube Notcher, Femi 782XL Bandsaw

'Featherbed Motorcycle Frames with various motors'

Customer:

Mick Covill

Tool Used:

JD Squared Model 32 Tube Bender

Our customer Mick's project made using the JD Squared Model 32 Tube Bender

Customer:

SA Engineering

Tool Used:

Stakesy's Sheet Metal Hole Flare

Made some gussets up this evening with some new dies from Stakesy's well pleased with how clean the tooling is working.

Customer:

JM Customs

Tool Used:

Stakesy's Leather Shot Bag

JM Customs fabricating a fuel tank for his bike

Customer:

54M Fabrications

Tool Used:

JD Squared Notchmaster

'The notch quality on the jd2 notchmaster has definitely saved me alot of time'

Customer:

Redmetal Fabrication

Tool Used:

JD Squared BR-23 Bead Roller

'First time playing with the JD2 Bead roller from Stakesy's, working out the rear floor and tubs in the Ford. Now I want to bead roll everything.'

Customer:

Buffalo Builds

Tool Used:

JD Squared Model 32 & Notchmaster

'The death cart chassis for the Fiesta. All done using the JD Squared Model 32 tube bender and Notchmaster from Stakesy's'

Customer:

Two Roads Motorworks

Tool Used:

JD Squared Model 32

'R154 to S13 gearbox mount. What’s the point of having a tube bender if you don’t bend everything?'

Customer:

Steve Bodiley

Tool Used:

Useful Tools Mandrel Bender

'Thin walled tube bending on our Stakesy's mandrel bender.'

Customer:

SA Engineering

Tool Used:

JD Squared Model 32

'Front engine mount underway. So pleased how the Stakesy's supplied JD Squared Model 32 bender is working on this 4130 chromoly.'

Customer:

Vitesse Engineering

Tool Used:

JD Squared Model 32

'Harley Davidson KR750 frame replica'